[LangInfo]
Attention=This file belongs in the Samurize plugins folder.
Author=uziq
Date=September 26 2005
Lang=English

[General]
AlertMax=Sorry, you cannot have more than 100 alerts!
Animate=Animate
AntiAlias=AntiAlias
AntiAliasGrid=AntiAliasGrid
AutoReverse=AutoReverse
Back=Back
BitPerPixel=BitPerPixel
BitPerPixelGrid=BitPerPixelGrid
Box=Box
BoxInner=Inner Box
BoxInnerInsetCustom=Custom Inset
BoxInnerRoundCustom=Custom Round
BoxOuterEmbossInside=Emboss Inside
BoxOuterEmbossOutside=Emboss Outside
Button=Button
Chisel=Chisel
ClearAll=Clear All
ClearTypeGrid=ClearTypeGrid
CloseDialog=You must close the previous dialog.
Current=Current
Days=Days
DeletePreset=Are you sure you want to delete this preset?
DisplayHasMoreOptions=The Display tab has more options.
Double=Double
Dropdown=Dropdown
Emboss=Emboss
Flat=Flat
FocusBox=FocusBox
Forward=Forward
Frame=Frame
Generate=Generate
Help=There is no help for the selected item.
HelpAbbreviate=Use the abbreviated form of the string.
HelpAlert=Enable/Disable this alert tab. Alerts tab are checked from left to right for a valid alert condition. If there is no alert, then the Default tab is used.
HelpAlertAdd=Click to add a new alert tab based on the settings of the currently selected tab.
HelpAlertCombo=Select the expression for testing the value (%v).
HelpAlertDelete=Click to delete the currently selected alert tab.
HelpAlertText=Enter the alert value to be compared against the meter value.
HelpAlpha=The transparency of the visual output. Enter a value from 0-255.
HelpBox=Show a box behind the text.
HelpBoxInner=Show an inner box.
HelpBoxInnerAlphaEnd=The ending transparency of the inner box. (Only used when there is a gradient)
HelpBoxInnerAlphaStart=The starting transparency of the inner box. Or, if there is no gradient, then this will be the only transparency of the box.
HelpBoxInnerColorEnd=The ending color of the inner box. (Only used when there is a gradient)
HelpBoxInnerColorStart=The starting color of the inner box. Or, if there is no gradient, then this will be the only color of the box.
HelpBoxInnerCustom=Use custom inset values. This is so each inner edge can be a custom distance from the outer box.
HelpBoxInnerEmboss=Emboss the inner box.
HelpBoxInnerInsetAll=The distance the inside box should be from the outer box. The gap will be equal on all sides.
HelpBoxInnerInsetBottom=The distance from the bottom edge of the outer box to the inner box.
HelpBoxInnerInsetLeft=The distance from the left edge of the outer box to the inner box.
HelpBoxInnerInsetRight=The distance from the right edge of the outer box to the inner box.
HelpBoxInnerInsetTop=The distance from the top edge of the outer box to the inner box.
HelpBoxInnerRoundCustom=Put a check to use custom roundness of the inner box.  Otherwise, the roundness will be auto calculated in order to keep the inset distance equal on all edges.
HelpBoxInnerRoundX=The roundness of the inner box along the X-axis. In order for the roundness to show, both the X and Y values must be non-zero.
HelpBoxInnerRoundY=The roundness of the inner box along the Y-axis. In order for the roundness to show, both the X and Y values must be non-zero.
HelpBoxOuterAlphaEnd=The ending transparency of the box. (Only used when there is a gradient)
HelpBoxOuterAlphaStart=The starting transparency of the box. Or, if there is no gradient, then this will be the only transparency of the box.
HelpBoxOuterColorEnd=The ending color of the box. (Only used when there is a gradient)
HelpBoxOuterColorStart=The starting color of the box. Or, if there is no gradient, then this will be the only color of the box.
HelpBoxOuterEmbossInside=Emboss the inside edge of the box. (Only used when there is an inner box)
HelpBoxOuterEmbossOutside=Emboss the outside edge of the box.
HelpBoxOuterGradient=Choose a gradient option to use on the box. If there is no gradient, then only the first color will be used.
HelpBoxOuterRoundX=The roundness of the box along the X-axis. In order for the roundness to show, both the X and Y values must be non-zero.
HelpBoxOuterRoundY=The roundness of the box along the Y-axis. In order for the roundness to show, both the X and Y values must be non-zero.
HelpBoxShadow=Show a shadow behind the box.
HelpBoxShadowColor=The color of the box shadow.
HelpBoxShadowOffsetX=The X-axis (left-right) offset of the box shadow.
HelpBoxShadowOffsetY=The Y-axis (up-down) offset of the box shadow.
HelpButtonCheck=Show a button at the end of the textbox.
HelpButtonEdge3D=Apply a 3D edge to the button.
HelpButtonEdgeDouble=Apply a double edge to the button.
HelpButtonEdgeFlat=Apply a flat edge to the button.
HelpButtonEdgeSunken=Apply a sunken edge to the button.
HelpButtonExample=This is what the button will look like.  Click it to change the color.
HelpButtonFocusBox=Show a dotted line around the button whenever it is selected.
HelpButtonLabel=Enter the button label.
HelpCancel=Discard any changes and exit.
HelpCaseFormat=Specify the upper/lowercase format of the text.
HelpClear=Clear all the settings.
HelpClose=Close this dialog box.
HelpDecimals=The number of decimal places the meter value should have. (Only used when the meter value is numeric)
HelpDefaults=Reset everything to their default settings.
HelpDynamicMonth=The month will change relative to the viewing month. This is useful for displaying previous/next months that will always update as the viewing month changes.
HelpFontName=The font of the text.
HelpImage=Select the image to draw.
HelpLength=Restrict the length of the output string by using values >=1. Or, use 0 to output the entire string.
HelpMasterAlpha=This is the master transparency of everything that is drawn. Enter a value from 0-255.
HelpMeterCurrentlyShowing=This is the tab that the meter is currently drawing.
HelpMeterForceTab=Use this option to temporarily force the meter to draw whatever tab is selected. This is useful for testing different tabs in the editor.
HelpMonthShift=The number of months away relative to the viewing month. For instance, -1 show the previous month, 1 shows the next month, and 0 shows the month being viewed.
HelpOK=Save the settings and exit.
HelpObeyConfigRegion=The hover control will hide/show as ConfigRegion tells it to.
HelpPositionOption1=Upper-left alignment.
HelpPositionOption2=Upper-center alignment.
HelpPositionOption3=Upper-right alignment.
HelpPositionOption4=Middle-left alignment.
HelpPositionOption5=Center alignment.
HelpPositionOption6=Middle-right alignment.
HelpPositionOption7=Lower-left alignment.
HelpPositionOption8=Lower-center alignment.
HelpPositionOption9=Lower-right alignment.
HelpPreset=Select a preset from the list.
HelpPresetDelete=Delete the selected preset.
HelpPresetLoad=Load the selected preset.
HelpPresetSave=Save the selected preset.
HelpStaticMonth=The month will be static. This is useful for having a calendar that never changes.
HelpTabSize=The width of the tabs.
HelpText=Display this text.
HelpTextAlphaEnd=The ending transparency of the text. (Only used when there is a gradient)
HelpTextAlphaStart=The starting transparency of the text. Or, if there is no gradient, then this will be the only transparency of the text.
HelpTextAngle=The angle of the text rotated on the center of the meter. You should probably disable the text wrap and truncate options, along with the box option.
HelpTextBold=Make the text bold.
HelpTextChisel=Chisel the text so it looks sunken below the surface. It helps to use a low alpha value (50-150).
HelpTextColorEnd=The ending color of the text. (Only used when there is a gradient)
HelpTextColorStart=The starting color of the text. Or, if there is no gradient, then this will be the only color of the text.
HelpTextEmboss=Emboss the text so it looks raised above the surface.
HelpTextGradient=Choose a gradient option to use on the text. If there is no gradient, then only the first color will be used.
HelpTextItalic=Make the text italic.
HelpTextNudgeX=Fine tune the X-axis (left-right) position of the text.
HelpTextNudgeY=Fine tune the Y-axis (up-down) position of the text.
HelpTextOutline=Show an outline around the text.
HelpTextOutlineAlpha=The transparency of the outline around the text.
HelpTextOutlineColor=The outline color.
HelpTextOutlineThick=The outline thickness.
HelpTextOutput=The text output. You can use these variables: %v=value, %b=line break, %tab=tab
HelpTextRendering=Specify how text should be drawn. This does NOT apply to chiseled or outlined text.
HelpTextShadow=Show a shadow behind the text, which can be positioned by adjusting the (x,y) offsets.
HelpTextShadowAlpha=The transparency of the shadow behind the text.
HelpTextShadowColor=The color of the text shadow.
HelpTextShadowOffsetX=The X-axis (left-right) offset of the text shadow.
HelpTextShadowOffsetY=The Y-axis (up-down) offset of the text shadow.
HelpTextSize=The size of the text.
HelpTextUnderline=Underline the text.
HelpTextboxBGColor=The color of the textbox background.
HelpTextboxClear=The command will be cleared from the textbox after it is executed.
HelpTextboxColor=The color of the text inside the textbox.
HelpTextboxDropdown=Add a dropdown list of previous entries to the textbox.
HelpTextboxEdge3D=Apply a 3D edge to the textbox.
HelpTextboxEdgeDouble=Apply a double edge to the textbox.
HelpTextboxEdgeSunken=Apply a sunken edge to the textbox.
HelpTextboxExample=This is what the textbox will look like.
HelpTextboxHeight=The height of the textbox.
HelpTextboxWidth=The width of the textbox.
HelpThousands=Use thousands separators in the meter value (%v).
HelpTruncate=Truncate the text when it's too long to fit inside the meter.
HelpWordWrap=Wrap the text so it will fit inside the meter area.
Home=Home
HomePage=HomePage
ImageLabel=Use this image:
InSurrounding=InSurrounding
InThisMonth=InThisMonth
InputHasMoreOptions=The Input tab has more options.
Inset=Inset
LeftDiagonal=LeftDiagonal
Link=Link
LoadDefaults=If you load the defaults, you will lose your current settings!
LoadPreset=If you load this preset, you will lose your current settings!
MeterCurrentlyShowing=The meter currently shows tab:
MeterForceTab=Force meter to draw selected tab (editor testing)
NoGradient=No Gradient
NothingVisibleInEditor=Nothing will be visible in the editor.
ObeyConfigRegion=Obey the ConfigRegion plugin
Overwrite=Do you want to overwrite?
PreDelay=PreDelay
Prefix=Prefix
PresetDeleted=Preset has been deleted.
PresetExists=A preset with this name already exists!
PresetLoaded=Preset has been loaded.
PresetName=You need to specify the preset name.
PresetSaved=Preset has been saved.
Presets=Presets
Refresh=Refresh
Rendering=Rendering
Repeat=Repeat
Return=Return
ReturnAfter=ReturnAfter
RightDiagonal=RightDiagonal
SavePreset=Save preset with this name?
SelectPreset=Select a preset from the dropdown list.
Selection=Selection
Stack=Stack
Steps=Steps
Stop=Stop
Sunken=Sunken
Textbox=Textbox
ThisWillErase=This will erase all the settings, and you will not be able to undo this action!
Tilt=Tilt
Title=Title
Today=Today
Toggle=Toggle
WeekNumbers=WeekNumbers
Weekdays=Weekdays
Weekends=Weekends

[AstroPix]
Explanation=Explanation
HelpDateFrame=Choose today or a random date.
HelpDateRandomImage=Get a random image.
HelpDateText=The format of the returned date string. Example: dddd - mmm d, yyyy
HelpDateTextOptions=Variables for the returned date string.
HelpDateTodaysImage=Get today's image.
HelpReturnDate=The original date from the Astronomy Picture of the Day site.
HelpReturnExplanation=The explanation is information about the image.
HelpReturnFrame=Specify what data to return.
HelpReturnImage=The local image path is where the image is stored on your computer.  This should be used with the Image Draw Type.
HelpReturnPrefix=The prefix of the text and image files.
HelpReturnTitle=The title of the image.
LocalImagePath=Local Image Path

[AudioPlayer]
DefaultFolderLabel=Default music folder:
DefaultImageLabel=Default image:
ForwardSeek=Forward Seek
HelpActionCombo=Select an action to be performed for this input, or choose No Action when you only want the image to be changed.
HelpDefaultFolderLabel=Select the default folder that contains audio files.
HelpImageRotate=Rotate the image on its center.
HelpMuteImageLabel=Select the image for this input action that should be used when the audio is muted.
HelpPauseImageLabel=Select the image for this input action that should be used when the audio is paused.
HelpPauseLabel=Enter the 'paused' text to be added after the file name, while the audio is paused.
HelpPauseToggle=Allow the Play button to switch into a Paused state. Note that, by default, the Play button is always able to Un-pause.
HelpProgressBar=Draw a progress bar.
HelpProgressBarColorButton=The color of the progress bar.
HelpProgressBarDirection1=Make a horizontal progress bar (left-right).
HelpProgressBarDirection1=Make a vertical progress bar (up-down).
HelpProgressBarImage=Move an image along the progress bar.
HelpProgressBarReverse=Reverse the direction of the progress bar.
HelpProgressFile=Use a file position slider.
HelpProgressVolume=Use a volume position slider.
ImageRotateCheck=Rotate Image (knob)
Load=Load
Mute=Mute
MuteImageLabel=Use this image when muted:
Next=Next
None=-- NO ACTION --
Pause=Pause
PauseImageLabel=Use this image when paused:
PauseToggleCheck=Allow Play to Pause
PausedLabel='Paused' text:
Play=Play
Prev=Prev
ProgressSlider=Progress Slider
ReverseSeek=Reverse Seek
Stop=Stop
VisualOption2=Image (from Input tab)
VisualOutputFrame=Visual Output
VisualSliderFrame=Type of Slider
VisualSliderOption1=File Progress Slider
VisualSliderOption2=Volume Slider
VolumeDown=Volume Down
VolumeKnob=Volume Knob
VolumeSlider=Volume Slider
VolumeUp=Volume Up

[ComicFetcher]
ComicCodeLabel=Enter the comic code(s):  (Use | to separate multiple codes)
HelpComicCode=Enter the comic code(s) separated by |

[CommandBox]
ClearTextbox=Clear textbox after command is run
CommandBoxExample=CommandBox Example
HelpTextboxPrefix=An optional prefix that will be added to the command when the command is executed. NOTE: It will not be shown in the box.
HelpTextboxProtectedPrefix=An optional prefix that will be visible inside the command box. It is only for looks, and does not have any affect on commands. It cannot be deleted.
ProtectedLabel=Visible Prefix (nonfunctional)
RunCommand=Run Command

[ConfigPosition]
HelpPositionLabel=Specify the x,y location on the screen of where the top-left of the config should be.
HelpPositionX=The X location of the top-left of the config.
HelpPositionY=The Y location of the top-left of the config.
HelpRelativeLabel=Instead of specifing a static x,y position, you can make the config be positioned relative to a certain desktop location. (this is useful for different resolutions).
PositionLabel=Top-left corner of config:
RelativeLabel=Relative to Desktop Position:

[ConfigRegion]
HelpActionMeterName=Specify the meter you want to use for the region.
HelpAnimate=Hide/unhide a region going in a certain direction. This is not available for stacked regions.
HelpAnimateDirection=The direction to animate a region.
HelpAnimateReverse=Animate the region in the opposite direction the next time this action is used.
HelpAnimateSleep=The time delay inbetween steps (milliseconds).
HelpAnimateSteps=The number of steps it will take to animate the region.
HelpRegionHide=Remove a new region from the currently visible areas of the config.
HelpRegionShow=Add a new region to the currently visible areas of the config.
HelpRegionStack=Stack all the regions on top of each other (aligned at the top-left of the config).
HelpRegionToggle=Add/Remove a new region.
HelpStartMeterName=This will be the first region to be visible on config startup.  You can also initiate an infinite cycling loop by entering more than one region separated by |.
HelpStartSleep=The time delay (in milliseconds) between cycling regions.
StartCycle=You can cycle regions by separating them with |

[ConfigSlider]
BounceCheck=Add Bounce Movement
ClickReturnCheck=Auto-Return after..
ClickReverseCheck=Reverse Direction on Next Click
HelpBounce=Add a little 'bounce' to the sliding movement.
HelpRepeatCheck=Repeat the startup slide.
HelpRepeatLoop=Repeat the startup slide until the config is closed.
HelpRepeatTimes=Specify how many times to repeat the slide.
HelpReturn=Return the config to its original position after it slides.
HelpReturnCheck=Return the config to its original position after it slides.
HelpReturnDelay=How many milliseconds to wait before returning the config to its original position.
HelpReturnMS=How many milliseconds to wait before returning the config to its original position.
HelpSlideAlert=Slide the config when the meter value (%v) satisfies the alert.
HelpSlideReverse=Reverse the sliding direction after every click.
HelpSlideX=How far you want the config to slide left-right. Use a negative number to slide left, or a positive number to slide right.
HelpSlideY=How far you want the config to slide up-down. Use a negative number to slide up, or a positive number to slide down.
HelpStartupCheck=Slide the config when it's first started.
HelpStartupDelay=How many milliseconds to wait after the config starts before sliding will begin.
HelpSteps=How many steps the config should take to move the distance specified by SlideX and SlideY.
SlideOnStartup=Slide on Startup
SlideX=SlideX
SlideY=SlideY

[EventCalendar]
CalendarType=Calendar Type
DaysAhead=Days After Today
DaysBehind=Days Behind Today
EnterReminder=Enter Reminder
EnterReminder=Enter the reminder text. or if you want to delete a message, then use DEL # (where # is the event number shown next to the event).
EventsStr=Events String: (%d, %m, %y, %w, %e)
EventsTitle=Events
FromViewingMonth=from viewing month
HelpDaysAhead=How many days ahead from the current date.
HelpDaysBehind=How many days behind the current date.
HelpEventsStr=How the event text is formatted. You can use these variables: %d for the day, %m for month, %y for year, %w for weekday, and %e for the event text.
HelpIncludeSurrounding=Include the days from the previous and next months. This is mainly useful when marking out previous days.
HelpIndicator=Output this character string.
HelpMarkOutPrevious=Mark out days which come before the current date, using the specified indicator string. This should usually be a separate overlay meter.
HelpMonthChange=Shift the viewing month. For instance, -1 goes back one month, 1 goes forward one month. Use 0 to show the current month.
HelpOmitToday=Do not show the current day. This is useful so it won't interfere with an overlayed meter that displays the current day in a different font/size/color.
HelpRangeAll=Show all the days (weekdays and weekends).
HelpRangeWeekdays=Show only the weekdays. This is useful to display the weekdays (Monday-Friday) in a different font/size/color.
HelpRangeWeekends=Show only the weekends. This is useful to display the weekends (Sunday-Saturday) in a different font/size/color.
HelpSelectionInSurrounding=Display the days that are in the previous/next months, which overlap the viewing month on the 6 row calendar grid.
HelpSelectionInThisMonth=Display all the days in the viewing month.
HelpSelectionToday=Display the current day.
HelpSingleDigitDays=Insert this character string before single digit days. Mainly useful for making all days two digits long.
HelpTypeHorizontal=Make a horizontal (left-right) single row calendar.
HelpTypeSixRowGrid=Make a standard 6 row grid calendar.
HelpTypeVertical=Make a vertical (up-down) single column calendar.
HelpWeekdayPosition=The left-right position of the weekday. 1 is the first weekday; 7 is the last weekday. Only applies to 6 row grid calendars.
HelpYearTwoDigits=Show the year as 2 digits, instead of 4.
IncludeSurrounding=Include Surrounding Months
Indicator=Use Indicator
MarkOutPrevious=Mark Out Previous Days
MonthChange=MonthChange
MonthToDisplay=Month To Display
OmitToday=Omit Today
SingleDigitDays=Single Digit Days Char
SixRowGrid=6 Row Grid
TwoDigitYear=Show year as 2 digits
WeekdayPos=Weekday Position

[FamilyGuyQuotes]
ActionTip=TIP: Use this plugin as a mouse action to get a new quote.
GetQuoteEvery=Get a new quote every
HelpGetQuoteEvery=The quote will update at the given interval.
HelpIncludeTitle=This will add the episode title to the end of the quote. Not all quotes have the episode listed.
IncludeTitle=Include episode title (when avaliable)

[FileDrop]
ActionLabel=Action Text
ActionText=%a%b%c of %t%b%f
AlwaysCopy=Always Copy
AlwaysMove=Always Move
AlwaysUse=Always Use
DropAction=Drop Action
HelpActionText=The text to display as the file is being transferred. Variables that you can use are shown below.
HelpAlwaysCopy=Always copy the files. (duplicating from the source to the destination)
HelpAlwaysMove=Always move the files. (deleting from the source, and moving to the destination)
HelpAlwaysPrompt=Always prompt to give the option to either copy or move.
HelpAlwaysUse=Always use this filename. (should only be used for single file drops)
HelpIdleText=The text to display when nothing is being transferred.
HelpLocalFolder=Select this option to drop files to a local folder.
HelpLocalFolderName=The local folder to drop files into.
HelpNotify=Display a report when the drop operation has been completed.
HelpPassword=The password for logging into the server.
HelpProgress=Show a progress bar during the file transfer.
HelpPromptForFilename=You will be prompted for the filename.
HelpRecycleBin=Select this option to delete files.
HelpRecycleEmpty=The text to display for emptying the Recycle Bin.
HelpRecycleIsEmpty=The text to display when there are no items in the Recycle Bin.
HelpRecycleMany=The text to display when there's more than 1 item in the Recycle Bin.
HelpRecycleOne=The text to display when there's exactly 1 item in the Recycle Bin.
HelpRecycleOpen=The text to display for opening the Recycle Bin.
HelpRemoteFolder=Select this option to drop files to a remote folder (FTP).
HelpRemoteFolderName=The remote folder to drop files into.
HelpServer=The remote server to log into (ftp.server.com).
HelpUseHomeDir=Use the home directory (the default folder when logging into your FTP account).
HelpUseOriginal=The remote files will have the same as the local files.
HelpUsername=The username for logging into the server.
IdleLabel=Idle Text
IdleText=Drop Files Here
LocalFolder=Local/Network Folder
Notify=Show status report upon completion
RecycleBin=Recycle Bin
RecycleEmptyLabel=Empty
RecycleEmptyText=Empty Recycle Bin
RecycleHasManyItemsLabel=>1 Item
RecycleHasManyItemsText=Recycle Bin has %n items (%s MB)
RecycleHasOneItemLabel=1 Item
RecycleHasOneItemText=Recycle Bin has %n item (%s MB)
RecycleIsEmptyLabel=0 Items
RecycleIsEmptyText=Recycle Bin is empty
RecycleNote=These are strings for the Recycle Bin menu.  Use %n for the item count, and %s for size.
RecycleOpenLabel=Open
RecycleOpenText=Open Recycle Bin
RemoteFileName=Remote File Name
RemoteFolder=Remote Folder (FTP)
RemoteFolderLabel=Remote Folder
SettingsWarning=WARNING: Settings are stored in the config file. Your password will be saved with weak encryption so it won't be readable.
ShowFileProgress=Show File Progress
TextHelp3=%a - action
TextHelp4=%f - filename
TextHelp5=%c - current number
TextHelp6=%t - total file count
UseHomeDir=Use home directory
UseOriginal=Use Original

[FindTheTopProcess]
Exclude=Exclude these processes:
HelpExcludeCheck=Check this box if you want to exclude processes from the output data.
HelpExcludeText=Enter processes that you wish to exclude.  Put them on separate lines, and include the extension if there is one.
HelpOutput=Specify how you would like the output to be formatted. For example: '%n - %c%' will display 'ProcessName - 100%'
HelpRemoveExtensions=Hide the extension of each process. Example: Client.exe would become Client.
HelpRemoveSystemIdle=This will remove 'System Idle Process' from the output data. This process is automatically excluded when returning the total CPU load.
HelpReturnLabel=Select what data you want returned.
HelpReturnOption1=Return the total CPU load. System Idle Process is automatically removed, and you may also exclude processes down below.
HelpReturnOption2=Return a list of all running processes, each on a separate line, formatted however you want. You may exclude processes down below.
HelpReturnOption3=Return a list of two or more of the top processes, each on a separate line, formatted however you want. You may exclude processes down below.
HelpReturnOption4=Return a single process, by it's rank. For example, if the processes are sorted by CPU usage, Rank=1 will return the process that's using the most CPU.
HelpSortedLabel=Choose how the processes will be sorted.
HelpSortedOption1=Sort the processes by alphabetical order (A-Z).
HelpSortedOption2=Sort the processes by highest to lowest CPU usage (100%-0%).
HelpSortedOption3=Sort the processes by highest to lowest memory usage (100MB-0MB).
OutputLabel1=%n - name
OutputLabel2=%c - cpu usage
OutputLabel3=%m - memory usage (B)
OutputLabel4=%mKB - memory usage (KB)
OutputLabel5=%mMB - memory usage (MB)
Processes=processes
RemoveExtensions=Remove extensions
RemoveSystemIdle=Remove 'System Idle Process'
ReturnLabel=Return..
ReturnOption1=The total CPU load
ReturnOption2=A list of all processes
ReturnOption3=A list of the top
ReturnOption4=Single Process Rank:
SortOption1=Name
SortOption2=CPU Usage
SortOption3=Memory Usage
SortedByLabel=Sorted By..

[FlashViewer]
FileLocation=Flash File Location
HelpFileLocation=The location of the flash file you want to display. You may enter a local path, or a network location (such as a web address).

[GlassTube]
HelpTube3D=Enable to make the tube look 3D, or disable to make the ends of the tube rounded.
HelpTubeAlpha=The transparency of the tube.
HelpTubeBGAlpha=The transparency of the background behind the tube.
HelpTubeBGColor=The color of the background behind the tube.
HelpTubeColor=The color of the tube.
HelpTubeFluidAlpha=The transparency of the fluid inside the tube.
HelpTubeFluidColor=The color of the fluid inside the tube.
HelpTubeFluidOutlineAlpha=The transparency of the fluid outline.
HelpTubeFluidOutlineAuto=Enable automatic fluid outline color.
HelpTubeFluidOutlineColor=The color of the fluid outline.
HelpTubeFluidReverse=Reverse the direction the fluid is graphed.
HelpTubeHorizontal=Make the tube horizontal (left-right).
HelpTubeMaxValue=The maximum graphing value for the fluid inside the tube.
HelpTubeMinValue=The minimum graphing value for the fluid inside the tube.
HelpTubeReflection=The outside reflection on the tube.
HelpTubeThickness=The thickness of the tube walls.
HelpTubeTiltRound=The tilt/roundness of the tube.
HelpTubeVertical=Make the tube vertical (up-down).
Reflection=Reflection
Tube3D=3D
Tube=Tube
TubeFluid=Fluid
TubeGlass=Glass

[HTMLViewer]
HelpHTMLText=Enter the code (HTML) which will be used for output in the config. You can use %v to insert the meter value.

[MenuMaker]
FileTypeLimit=Limit to these file types:
Generate=Generate
HelpFileType=Restrict the automatic menu generation to these file types. Separate each extension with |. For example: exe|txt|jpg
HelpFolderBrowse=Specify a folder to create a menu from.
HelpGenerate=Have the plugin automatically create the menu, based on the folder and file types you've chosen.
HelpOpenFolder=This 'Open Folder' text will appear at the top of each submenu, when a menu is automatically generated.
OpenFolder='Open Folder' text:

[MeterMath]
HelpMath=Enter an expression using meter names and these operators: + - / *  NOTE: Order of Operation is ignored!
MathLabel=Enter the math expression (such as MeterName1 + MeterName2):

[MiniBrowser]
AddressBar=Address Bar
AddressBarExample=Address Bar Example
BrowserWindow=Browser Window
HelpAction=Select the browser action.
HelpAddressLink=The address to load when the link is clicked.
HelpHomePage=The home page location. It can be local, or on the web.
HelpScrollbars=Show scrollbars on the right and bottom of the browser window.
HelpStatusbar=Show a statusbar at the bottom of the browser window.
Scrollbars=Show Scrollbars
Statusbar=Show Statusbar

[NoteTaker]
Bullets=Bullets
DecreaseSize=Decrease Size
DottedUnderline=Dotted Underline
IncreaseSize=Increase Size
Justify=Justify
Numbering=Numbering
Protect=Protect
SolidUnderline=Solid Underline
Spacing=Spacing
Subscript=Subscript
Superscript=Superscript
TransparentBG=Transparent BG (beta)
VerticalScrollbar=Vertical Scrollbar

[PageScraper]
AddPrefix=Add Prefix
AddSuffix=Add Suffix
AllOccurances=Return All Occurances
AutoFind=AutoFind:
BeginAfter=Begin after this text:
ExcludeHeaders=Exclude Headers
FoundBetween=Found between:
HelpAllOccurances=Return a list of all the matches, using the output string for the formatting.
HelpDownload=Retrieves the specified webpage, and puts the source in the box below.
HelpExcludeHeaders=Remove the HTTP headers before any matching begins.
HelpFilterAfter=This is an optional upper boundary where matches will start. Anything above this boundary is ignored.
HelpHiddenUpdates=By default, the plugin will be paused while the client is hidden. Check this box to override, and continue refreshing at the specified interval.
HelpMatch=A match is any text contained within the start and end strings that you specify. Look at the webpage's source (in the above box) to determine what string boundaries to use.
HelpMatchEnd=The end of a match. This text is not included in the returned match string.
HelpMatchIgnore=Ignore all matches which contain the specified string. This is useful when there's an oddball match in a list of all occurances.
HelpMatchListbox=Put a check to enable a match. The settings are over on the right side, and you can rename the match up above.
HelpMatchName=Enter a descriptive name for the match.
HelpMatchOutput=Format of the match output. %Occurance will return the match occurance number. %MatchX (or %MatchName) will return the match.
HelpMatchOutputResult=The end result of all the matches.
HelpMatchPrefix=Add an optional prefix to the match.
HelpMatchResult=The first occurance of a match.
HelpMatchSearch=Try to automatically find the match boundaries, by entering the first occurance of a match. Results may vary depending on the webpage layout.
HelpMatchStart=The start of a match. This text is not included in the returned match string.
HelpMatchSuffix=Add an optional suffix to the match.
HelpRemoveHTML=Remove all HTML from the match.
HelpReplaceListbox=Remove text from the match. Note that the replaces occur from top to bottom, so keep that in mind when doing more than one replace operation.
HelpReplaceNew=The text replacement.
HelpReplaceOld=Replace this text.
HelpSaveINI=Save all the matches to an INI file in the Samurize\plugins\PageScraper\ folder. Use the ReadINI plugin to extract the matches to your config.
HelpSaveTMP=Save all the matches to a TMP file in the Samurize\plugins\PageScraper\ folder. Use text meters to add lines from the file to your config.
HelpTrimWhitespace=Remove all whitespace from the beginning and end of the match.
HelpUpdate=Download the webpage, and update the match(es), at the given interval.
HelpWebpage=Enter the webpage address you want to scrape.
HelpWebpageResult=The webpage source.
HiddenUpdates=Allow updates while config is hidden
IgnoreMatches=Ignore matches containing:
OutputString=Output String:
RemoveHTML=Remove all HTML
SaveINIFile=Save matches to INI file:
SaveTMPFile=Save output to TMP file:
TrimWhitespace=Trim Whitespace
WebpageToScrape=Webpage Address to scrape:

[ReadINI]
BlankString=Return this string when the param is blank:
HelpBlankString=Use this custom string when there is no parameter.
HelpINIFile=Load this INI file.
HelpParam=Select a param to be read. Double-click a param to select it and close the dialog. or, hold down Ctrl to select more than one param.
HelpReturn=When multiple params are selected, you must enter each param prefixed with %. You can also enter custom text. Example: Param1 - %Param2
HelpSection=Select the section which contains the param(s) you want to retrieve.
INIFile=INI File:
Param=Param:
ReadINITip=Double-click to select a param and close the dialog. You can select multiple params by holding the Control key. Then, enter the params prefixed with % in the Return String (%param1 %param2).
Return=Return String:
Section=Section:
SelectINIFile=Select the INI file

[TextFX]

[UnicodeToANSI]
HelpOpenUnicodeFile=Specify the Unicode file to open.
HelpSaveANSIFile=Save the converted ANSI text to a file.
HelpSaveAs=Specify a new file where the ANSI should be saved.
HelpSaveOverwrite=Resave the original Unicode file as an ANSI file.
OpenUnicodeFile=Open Unicode File:
SaveANSIFile=Save as ANSI file
SaveOverwrite=Overwrite original file
SelectFileToSave=Select the file to save as
SelectUnicodeFile=Select the Unicode file

[VisualPluginCalendar]
FromCurrent=from current
Gap=Gap
GridGapHorizontal=HGrid Gap
GridGapVertical=VGrid Gap
HelpDisplay=Display this element on the calendar.
HelpFrame=Show a frame around the entire calendar.
HelpFrameAlpha=The transparency of the frame.
HelpFrameColor=The color of the frame.
HelpGap=The gap in between this element and the days.
HelpGridGapHorizontal=The horizontal gap between each box on the grid.
HelpGridGapVertical=The vertical gap between each box on the grid.
HelpSize=The size of this calendar element.